102
For configuration of intelligent rules, see “4.4.2.2 Configuring Intelligent Rules.”
4.4.5.3
View Web Interface Alarm Records
After finishing settings in "4.4.5.1 Configure Smart Plan" and "4.4.5.2 Configure Boat Detection",
select
Alarm
tab and select
IVS
in
Alarm
Type
to enable alarm notifications on the web interface.
Then view unexpected boats records on the
Alarm
tab when an alarm is triggered.
4.4.6
Configuring Fire Warning
The system will give out an alarm once a fire is detected.
Select
Setting > Smart Thermal > Fire Warning
.
Step 1
The
Fire Warning
interface is displayed. See Figure 4-52.
Fire warning
Figure 4-52
Select a preset.
Step 2
The camera turns to the position.
This step is required only when preset is supported by your Camera.
Select
the
On
check box.
Step 3
Set rules of fire warning.
Step 4
1)
Select fire warning mode on your own needs.
High response mode is your only option when you want your camera to detect any a
hidden fire danger.
