Dahua PSDW5631S-B360 Quick Start Manual Download Page 2

Quick Start Guide 

Foreword 

General 

This manual introduces the functions, installation and operations of the camera. 

Safety Instructions 

The following categorized signal words with defined meaning might appear in the manual. 

Signal Words 

Meaning 

WARNING

 

Indicates a medium or low potential hazard which, if not avoided, 
could result in slight or moderate injury. 

CAUTION

 

Indicates a potential risk which, if not avoided, could result in 
property damage, data loss, lower performance, or unpredictable 
result. 

NOTE

 

Provides additional information as the emphasis and supplement to 
the text. 

Revision History 

Version 

Revision Content 

Release Time 

V1.0.1 

Updated "Important Safeguards and Warnings." 

April 2021 

V1.0.0 

First Release. 

November 2018 

About the Manual 

 

The manual is for reference only. If there is inconsistency between the manual and the actual 
product, the actual product shall prevail. 

 

We are not liable for any loss caused by the operations that do not comply with the manual. 

 

The manual would be updated according to the latest laws and regulations of related 
jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our 
official website. If there is inconsistency between paper manual and the electronic version, the 
electronic version shall prevail. 

 

All the designs and software are subject to change without prior written notice. The product 
updates might cause some differences between the actual product and the manual. Please 
contact the customer service for the latest program and supplementary documentation. 

 

There still might be deviation in technical data, functions and operations description, or errors 
in print. If there is any doubt or dispute, we reserve the right of final explanation. 

 

Upgrade the reader software or try other mainstream reader software if the manual (in PDF 
format) cannot be opened. 

 

All trademarks, registered trademarks and the company names in the manual are the properties 
of their respective owners. 

Summary of Contents for PSDW5631S-B360



















Reviews: