Dahua PFH610V-IR User Manual Download Page 4

 

III 

Important Safeguards and Warnings 

The following description is the correct application method of the device. Please read the 

manual carefully before use, in order to prevent danger and property loss. Strictly conform to 

the manual during application and keep it properly after reading. 

 

 

Please install it at stable places, and prevent it from falling. 

 

Use the device only within rated input and output range. 

 

Please don’t dismantle the device arbitrarily. 

 

 

The product shall use electric wires (power wires) recommended by this area, which shall 

be used within its rated specification. 

 

Please  use  power  supply  that  meets  SELV  (safety  extra  low  voltage)  requirements,  and 

supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For 

specific power supply requirements, please refer to device labels. 

 

If power plug or appliance coupler is a disconnecting device, please ensure its convenient 

operation. 

About this Document 

 

This document is for reference only. Please refer to the actual product for more details. 

 

This  document  serves  as  a  reference  for  multiple  types  of  products,  whose  specific 
operations won’t be enumerated. Please operate according to actual products.   

 

The user shall undertake any losses resulting from violation of guidance in the document. 

 

In  case  that  PDF  document  cannot  be  opened,  please  upgrade  the  reading  tool  to  the 

latest version or use other mainstream reading tools.   

 

This company reserves rights to revise any information in the document anytime; and the 

revised  contents  will  be  added  to  the  new  version  without  prior  announcement.  Some 

functions of the products may be slightly different before and after revision.   

 

The  document  may  include  technically  inaccurate  contents,  inconsistencies  with  product 

functions and operations, or misprint. Final explanations of the company shall prevail. 

 

Summary of Contents for PFH610V-IR






















Reviews: