Quick Start Guide
10
3.3.2
Installing SD Card (Optional)
SD card slot is available on select models.
Please disconnect the power from the device before installing the SD card.
Press the reset button for 10 seconds to reset the device.
The SD card cover is related to the device waterproof performance; please be sure to put the
silica gel ring of the SD card cover back to the waterproof groove after the SD card is installed
completely.
The SD card shall be replaced within 4 hours; otherwise it will cause desiccant failure and
abnormities such as water mist and etc.
3.3.3
Attaching Device
Make sure the mounting surface is strong enough to hold at least three times of the total weight of
device and bracket.
Connect the host grounding hole (
) to ground wire, which can improve device reliability
effectively. The ground hole is located next to the cable exit hole which is on the back of the bottom
cover; the specification of grounding screw is M2.5.
Summary of Contents for Panoramic Fisheye
