2
1.4.2 1.5U
This series DVR has four SATA HDDs.
1.4.3 2U
4. Turn the device upside down
and then turn the screws in
firmly.
5.
Fix the HDD firmly
.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.
1. Loosen the screws of the
upper cover.
2. Line up the HDD to the four
holes of the HDD bracket.
3.
Use four screws to fix HDD.
4. Unfasten the HDD power
cable.
5.
Use the special data cable to
connect the HDD and the SATA
port
6. Insert the HDD power cable.
Close the chassis and fix the
screws to secure firmly.
