5. Select the event from the Event Type pull-down menu (No SD Card, Capacity Warning, SD Card
Error).
6. Check the Enable box to activate the alarm for this event.
7. Check the Relay-out box to enable a relay alarm. Then, specify the time in seconds to delay the
alarm relay output (10 s to 300 s).
8. Check the Send Email box to send an email to a specified user after the device triggers an alarm.
9. Set the capacity limit for the Micro SD Card (available with the Capacity Warning event type). The
device triggers an alarm once the amount of data on the card surpasses this limit.
Figure 5-7
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]