Local Configurations
90
FTP
Figure 4-72
Select
Enable
to enable FTP upload.
Step 2
The system selects
SFTP
by default. It is recommended to keep this default setting.
Step 3
When selecting
FTP
, the system gives a risk prompt. Select
OK
or
Cancel
based on
your needs.
Configure TCP/IP parameters. For details, see Table 4-21.
Step 4
Table 4-21 FTP parameter description
Name
Description
Server IP
The IP address of the PC that is installed with the FTP/SFTP server
Port
The default value is 21
Username
The username and password used to access the server
Password
Anonymous
Select
Anonymous
if you want to login to the server anonymously
Remote
Directory
Create folder on FTP server
If you do not enter the name of remote directory, the system
automatically creates the folders according to the IP, time, and channel
If you enter the name of remote directory, the system creates the folder
with the entered name under the FTP/SFTP root directory first, and
then automatically creates the folders according to the IP, time, and
channel
File Length
Enter the length of the uploaded recorded video
If the entered length is less than the recorded video length, only a
section of the recorded video can be uploaded
If the entered length is more than the recorded video length, the whole
recorded video can be uploaded
If the entered length is 0, the whole recorded video will be uploaded