73
4.14 System Setup
4.14.1
General
It is to set time format, DST, language and etc.
Step 1 From Main menu->Setting->System->General->General, enter the general interface.
See Figure 4-72.
Figure 4-72
Step 2 Set parameters.
System time: Here is for you to set system time
Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
Date separator: There are three denotations to separate date: dot, beeline and solidus.
DST: Here you can set DST time and date. Please enable DST function and then cli ck set
button. You can see an interface is shown as in Figure 4-73.Here you can set start time and
end time by setting corresponding week setup. In Figure 4-73 , check date button, you can
set start time and end time by setting corresponding date setup.
Time format: There are two types: 24-hour mode or 12-hour mode.
Language: System supports various languages: Chinese (simplified), Chinese (Traditional),
English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight
difference maybe found in various series.)
Video standard: There are two formats: NTSC and PAL.
HDD full: Here is for you to select working mode when hard disk is full. There are two options:
stop recording or rewrite. If current working HDD is overwritten or the current HDD is full while
the next HDD is no empty, then system stops recording, If the current HDD is full and then
next HDD is not empty, then system overwrites the previous files. Please note this locked file
will not be overwritten.
