Dahua Mobile DVR Series Page 85 User Manual Download

Page: 85 / 172



License No.: It is to set license number.



Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120

minutes. Default value is 60 minutes.



Time Sync: There are three sync modes: DSS/GPS/NTP. See Figure 4-74.



DSS: After device connected to the DSS, it can sync time with the DSS.



GPS: After device connected to the GPS antenna, it can sync time with current time zone

and satellite.



NTP: After set NTP, device can sync time with the NTP server. Click NTP setup, and

then input server IP, port, time zone and upgrade interval.



Auto logout: Here is for you to set auto logout interval once login user remains inactive for a

specified time. Value ranges from 0 to 60 minutes.



Preview bar: Check the box here, system displays the preview bar on the interface.

Figure 4-73

Figure 4-74

NTP interface is shown as below. See Figure 4-75.

Summary of Contents for Mobile DVR Series













































































































































































Search results

Summary of Contents for Mobile DVR Series

Reviews:

Related manuals for Mobile DVR Series

Brands by name

Popular brands

Dahua Mobile DVR Series, User Manual

Search results

Summary of Contents for Mobile DVR Series

Reviews:

Related manuals for Mobile DVR Series

Brands by name

Popular brands