126
Select corresponding check box you want to use for restoring.
Default: Click
Default
, and the
Reboot
dialog box is popped up. See Figure 7-11. Then
click
OK
. All configurations other than user name, password, security questions and
device IP are restored to the default configuration of the device.
Factory Default: Click
Factory Defaults
, and the
Reboot
dialog box is displayed. See
Figure 7-12. Then click
OK
, and the system restarts. After the device is restarted, the
system will restore to factory defaults, and the device requires initialization again.
Proceed with caution.
When there is a user operating on the Local interface, restoring to factory defaults
cannot be performed until the local user logs out.
Reboot prompt (1)
Reboot prompt (2)
Network Sniffer
The packet data can be provided to the developers or engineers to analyze the network usage.
Preparation
The device being captured is connected to an external backup device.
Procedure
Click SETTING > System Info > Packet Sniffer Backup.
The
Packet Sniffer Backup
interface is displayed.