13
Installing HDD (single HDD)
Install the HDD carrier enclosure in place along the rails, and then fix the HDD enclosure rear
panel with two screws.
Place the HDD carrier back to the Device, tighten two screws and close the door lock.
2.3.1.2
MNVR4208-I series
MNVR4208-I series devices support dual HDDs.
Gently press the left front cover.
The left front cover automatically opens.
Use a particular key to unlock the door.
Open door lock switch (dual HDDs).
Loosen the two screws at the front panel and take out the HDD carrier along the guide rail.
Take out the HDD carrier (dual HDDs).
Loosen two screws on the back panel of the HDD carrier, take out the rear carrier panel, and
remove the HDD carrier enclosure.