Dahua MNVR4104-I Series User Manual Download

Page: 104 / 145

Ap settings

Enter SSID, select work band and verification type, and then enter the password.



The work band can only be 2.4G.



Select the check box behind

Password

, and the password will be visible. The default

password is 12345678.

Click

5.6.3

Configuring Cellular Settings

Preparation



Make sure that the device is equipped with cellular module and inserted with SIM card from
corresponding communication operators.



The dial number, user name, and password have been obtained from corresponding
communication operators.

Procedure

Select SETTING > NETWORK > Cellular.

The

Cellular

interface is displayed.

After cellular module is connected, the module information and wireless signal are
displayed; if not, click

Search

to search for wireless signal.

Summary of Contents for MNVR4104-I Series


















































































































































Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands

Dahua MNVR4104-I Series, User Manual

Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands