background image

                                                                      

 

 

16

7777        

        

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions:  

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including interference that may cause 

undesired operation.  

  

Attention that changes or modification not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. 

  

Note: This product has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This product generates, 

uses, and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this product does 

cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:  

—Reorient or relocate the receiving antenna.  

—Increase the separation between the equipment and receiver.  

—Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.  

—Consult the dealer or an experienced radio/TV technician for help. 

 

This equipment should be installed and operated with a minimum distance 20cm between the 

radiator and your body

 

 

 

 

Dahua Technology Co., Ltd 

Address

No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. 

Postcode: 310053 

Tel: +86-571-87688883 

Fax: +86-571-87688815 

Email:[email protected] 

Website: www.dahuasecurity.com 

 

Summary of Contents for K Series


















Reviews: