Quick Start Guide
7
Figure 2-4 Modify IP address
Step 3
Select
Static
mode, and then enter start IP, subnet mask, and gateway.
●
IP addresses of multiple cameras will be set to the same if you select the
Same IP
checkbox.
●
If DHCP server is available in the network, cameras will automatically obtain IP
addresses from DHCP server when you select
DHCP
.
Step 4
Click
OK
.
2.3 Logging in to Web Page
Step 1
Open IE browser, enter the IP address of the device in the address bar, and then press the
Enter key.
If the setup wizard is displayed, finish the settings as instructed.
Step 2
Enter the username and password in the login box, and then click
Login
.
Step 3
For the first-time login, click
Click Here to Download Plugin
, and then install the plugin as
instructed.
The home page is displayed when the installation is finished.
