18
3 Installation
3.1 Lens
3.1.1 Lens Installation
Figure 3- 1 Lens installation 1
Figure 3- 2 Lens installation 2
3.1.1.1 Auto Aperture Lens
Please follow the steps listed below for auto aperture lens installation.
Remove the CCD protection cap of the device, and then line up the lens to the proper installation
position. Turn clockwise until the lens is fixed firmly.
Step 1. Insert the lens cable socket to the auto lens connector in the side panel.
Step 2. Adjust focus length.
3.1.1.2 Manual Lens
Install C type lens
Step 1. Remove the CCD protection cap from the device.
Step 2. Install the C/CS adapter to the camera. Turn clockwise to secure against the focusing
ring firmly.
Step 3. Line up the C lens to the installation position of the C/CS adapter. Turn clockwise to fix
the lens.
Step 4. Use slotted screwdriver to fasten the screw near the focusing ring and then turn counter
clockwise to move the focusing ring out for several millimeters. Now you can focus manually
and check the video is clear or not. If you can not see the clear video, you can adjust via the
flange-back.
