Controlling PTZ Camera
1. Connect the IP-KB1 keyboard to the same LAN as the PTZ camera.
2. Enter the keyboard menu by pressing the Setup key.
3. Enter keyboard password 888888 (by default) and press Enter key.
4. Select Menu Settings > System > Network. Configure the IP details of the keyboard to the same range as the LAN. Press
Enter key to
confirm.
5. Press Esc key to return to Menu Settings, select Zone and press Enter key. Configure the following settings:
ID
This is the ID of the zone, usually ID 1.
Name
This is the name of the zone, for example “PTZ”.
Type
When connecting to a PTZ this should be set to “SD”
Link
This should be set to “Net”
IP Address
Input the LAN IP address of the PTZ camera.
Port
Input the TCP port of the PTZ (default is 37777)
Rule
This should be set to DH-2
PW
The password for the PTZ (admin by default)
Press
Enter key to confirm the settings.
6. Press Esc key until the date and time is shown on the LCD screen.
To connect to the PTZ camera press the ID button, if prompted for the keyboard password, enter 888888 and press the Enter
key. The display should now ask for an ID, enter ID number then press Enter key.
The LCD should show connecting for a short period before displaying the ID, Device Type and IP address on the LCD screen.
You should now have control of the PTZ camera using the keyboard.
Standard Keyboard Commands
Joystick
Pan/Tilt
camera
Zoom
+ -
Zoom PTZ in or out
Number key > Enter key
Adjust PTZ control speed
Iris
+ -
Open or Close iris
Focus
+ -
Adjust
focus
Preset
Save or Go to Preset
Controlling PTZ Camera
Camera Network
