Official UK distribution partner
Controlling NVR & PTZ Camera
1. Connect the IP-KB1 keyboard to the same LAN as the NVR.
2. Enter the keyboard menu by pressing the Setup key.
3. Enter keyboard password 888888 (by default) and press Enter key.
4. Select Menu Settings > System > Network. Configure the IP details of the keyboard to the same range as the LAN.
Press Enter key to confirm.
5. Press Esc key to return to Menu Settings, select Zone and press Enter key. Configure the following settings:
ID
This is the ID of the zone, usually ID 1.
Name
This is the name of the zone, for example “NVR”.
Type
When connecting to an NVR this should be set to “DVR”
Link
This should be set to “Net”
IP Address
Input the LAN IP address of the NVR.
Port
Input the TCP port of the NVR (default is 37777)
Rule
This should be set to DH-2
PW
The password for the NVR (admin by default)
Press
Enter key to confirm the settings.
6. Press Esc key until the date and time is shown on the LCD screen.
Before following the steps below, if you are currently logged into the NVR on the local monitor please enter the NVR menu
and go to shutdown > log out.
To connect to the NVR press the ID button, if prompted for the keyboard password, enter 888888 and press the Enter key. The
display should now ask for an ID, enter ID number then press Enter key.
The LCD should show connecting for a short period before displaying the ID, Device Type and IP address on the LCD screen.
You should now have control of the NVR using the keyboard.
Standard Keyboard Commands
Number key > Cam key
Display channel full screen
Number key > PTZ key
Control PTZ camera
Number key > Multi key
Display desired multi screen (eg 4, 9, 16 etc)
Play key
Access playback
Enter key
Access menu
Controlling NVR & PTZ Camera
Camera Network
Internal Network
