Dahua HFD23 User Manual Download Page 175

Page: 175 / 190

164

Figure 5-83

Please refer to the following sheet for log parameter information.

Parameter Function

Type

Log types include: system operation, configuration operation, data

operation, event operation, record operation, user management, log

clear.

Start time

Set the start time of the requested log.

End time

Set the end time of the requested log.

You can select log type from the drop down list and then click search

button to view the list.

You can click the stop button to terminate current search operation.

Detailed
information

You can select one item to view the detailed information.

Clear

You can click this button to delete all displayed log files. Please note
system does not support clear by type.

Backup

You can click this button to backup log files to current PC.

5.7.3

Online User

It is to view currently online user.

From Setup->Info->Online user, enter online user interface. See Figure 5-84.

Figure 5-84

Summary of Contents for HFD23































































































































































































Search results

Summary of Contents for HFD23

Reviews:

Related manuals for HFD23

Brands by name

Popular brands

Dahua HFD23, User Manual

Search results

Summary of Contents for HFD23

Reviews:

Related manuals for HFD23

Brands by name

Popular brands