Ovner’s manual
26
EN
2. Device Installation
2.1 Fix Device
Note
The mounting surface needs to sustain at least 3x weight of the bracket and
camera.
2.1.1 TURRET
Figure 2-1
Mounting surface
Expansion bolt
Screw
Camera
module
Enclosure
Decoration
cover ring
Pedestal
Step 1
Turn the pedestal ring clockwise out of the button placement and take it out.
Step 2
Use the attached position map and mark the spots for the expansion bolts. Drill
holes on the mounting surface and then insert expansion bolts into the holes,
secure them firmly.
Step 3
Lead the cable out from the cable exit hole of the device, you can select bottom
cabling or side cabling.
Summary of Contents for EZ-IP DOME
