56
4.9.6 Activate Pattern Function
In
394H394H
Figure 4-34, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In
395H395H
Figure 4-33, click border button. The interface is shown as in
396H396H
Figure 4-28.
Please go to
397H397H
Figure 4-30, use direction arrows to select camera left limit
Then please go to
398H398H
Figure 4-38 and click left limit button
Repeat the above procedures to set right limit.
Figure 4-38
4.9.8 Activate Auto Scan
In
399H399H
Figure 4-34, click “Auto Scan” button, the system begins auto scan.
Correspondingly, the auto scan button becomes to stop button. Click stop button to
terminate scan operation.
4.10
Flip
In
400H400H
Figure 4-34, click page switch button, you can see an interface is shown as below.
See
401H401H
Figure 4-39. Here you can set auxiliary function.
Click page switch button again, system goes back to
402H402H
Figure 4-30.
Figure 4-39
