6
iii.
Select Maintenance>Net Card tab, configure network mode, net card, IP address
and etc.
iv.
Select Maintenance>Time Setup tab, set time zone, date, time and NTP server.
v.
Select Maintenance>Port tab, set server port for WEB.
Step 2. Storage config.
There are local disk and network disk two storage methods.
i.
Select Storage Config>Local Disk interface, you can refresh, format disk and
perform other operations.
ii.
Select Storage Config>Network Disk interface, you can add, format, refresh disk
and perform other operations.
Step 3. Link config.
Select Link Config>Mail Link interface. See Figure 2- 8. When you configure alarm
scheme at Master-end, select main link and set main receiver. If alarm occurs, an
email will be sent to that email address.
Figure 2- 8
i.
Configure parameter, click Application. SMTP server’s listening port is 25 by
default.
ii.
Check Enable.
3 WEB Manager
You can refer to the following steps to login DSS manager.
Note: Details please see the docume
nt “DSS Client User's Manual” and “DSS Manager
User's Manual”
Step 1. In Internet Explorer, input IP address of DSS, press Enter. You will see Figure 3- 1.
Default username is
system
. Default password is
123456
.
