Dahua Digital VTH User Manual Download

Page: 41 / 85

Info

You can view and manage different kinds of information.



Information in

Security Alarm

and

Publish Info

is stored in the device, and the one in

Guest Message

and

Video Pictures

is stored in the SD card, which means you need an

SD card for these two functions.



Only certain models support SD card.



If the storage in the Device or SD card is full, the oldest records will be overwritten. Back
up the records as needed.

4.3.1

Security Alarm

When an alarm is triggered, there will be 15s alarm sound, and the interface below will be
displayed. The alarm information will be uploaded to the alarm record interface and management
platform.

Message

Select

Info

> Security

Alarm

, and then you can view and manage all alarm records.

Summary of Contents for Digital VTH






















































































Search results

Summary of Contents for Digital VTH

Reviews:

Related manuals for Digital VTH

Brands by name

Popular brands

Dahua Digital VTH, User Manual

Search results

Summary of Contents for Digital VTH

Reviews:

Related manuals for Digital VTH

Brands by name

Popular brands