Interface Configuration
24
Step 2 Adjust backlight mode by the up and down buttons on the remote control according to
your requirement.
There are three backlight modes: Powersave, Standard, Highlight.
4.4.5 Soft Addr
Soft addr switch is used to set soft address switch.
Step 1 Select
System>Soft Addr
.
The
Soft Addr
interface is displayed. See Figure 4-19.
Figure 4-19 Soft address switch
Step 2 Set soft address by the left and right buttons on the remote control according to your
requirement. For detailed parameters, see Table 4-3.
Table 4-3 Soft address parameters.
Parameter
Descriptions
Row address
Row address of the screen.
Line address
Line address of the screen.
Row range
Row range of the screen.
Line range
Line range of the screen.
Unit display
There are two options: On and Off.
Here line means column.
4.4.6 Restore Settings
Restore settings is used to restore the system to factory settings.
Step 1 Select
System>Restore Setting
.
Step 2 Press
right
buttons of the remote control to complete the setting.
4.4.7 Version Info
Version is used to display program version
Step 1
Select
System>Version Info.
Step 2
Press
right
buttons of the remote control to display program version.
