Interface Configuration
20
Step 2 Select
Aspect Ratio
by the up and down buttons on the remote control according to
your requirement. For parameters of zoom mode, see Table 4-2.
Table 4-2 Parameters of zoom mode
Parameter
Descriptions
4:3
Pictures are displayed on the scale of 4:3.
16:9
Pictures are displayed on the scale of 16:9.
Panorama
Display in full screen.
4.1.8 Noise Reduction
To improve quality of pictures, adjust the noise reduction.
Only in CVBS signal mode can you select picture noise deduction function.
Step 1 Select
Picture > Noise Reduction
.
The
Noise Reduction
interface is displayed. See Figure 4-10.
Figure 4-10 Noise reduction
Step 2 Select noise reduction parameters by the up and down buttons on the remote control
according to your requirement.
4.1.9 Hue
It is used to adjust the tone of a screen.
Only valid under NTSC standard.
Step 1 Select Picture > Hue
The
HUe
interface is displayed. See Figure 4-811
Figure 4-11 Hue
Step 2 Adjust Hue by the left and right on the remote control according to your requirement.
4.2 Geometry
Different signal modes have different geometry parameters.
