3 Installation
3.1 Preparation
To ensure correct function and safety, remember to check whether your site is ready for the
installation in the first place.
Table 3-1 Preparation
Item
Description
Grounding
The IR touchscreen requires that the site should be safely grounded.
Check the voltage between the live and neutral wires, between the live and
ground wires, and between the neutral and ground wires. If the voltage is
abnormal, report the issue to the technician.
The specific voltage requirements might vary depending on your local
standards.
Power supply
The power supply circuit for the Device should be independent from lighting
and other circuits to avoid interference in power frequency.
Wall
Make sure that the wall can bear a load of 160 kg or more.
Space
Make sure that there is enough space for the Device.
The ideal reserved space is 10 mm greater than the length and height of the
Device.
If you want to embed the Device onto the wall, make sure that there is enough
space for camera, OPS installation, and to use the ports and buttoms of the
Device.
Tools
Prepare the installation tools.
●
To install the Device onto a mobile bracket, you need an electric hammer,
allen wrench, crosshead screwdriver, slotted screwdriver, combination
wrench, front maintenance tools, work gloves, and other tools.
●
To install the Device onto a wall, you need an electric hammer, impact driver,
allen wrench, crosshead screwdriver, slotted screwdriver, laser level or spirit
level, tape measure, front maintenance tools, work gloves, and other tools.
You can find the allen wrench and combination wrench in the accessary
package.
Quick Start Guide
9
