Dahua DHI-NVR608R-64-4KS2 Quick Start Manual Download Page 27 | Manualshive

Page: 27 / 33

Dahua DHI-NVR608R-64-4KS2 Quick Start Manual Download Page 27

22

view the monitoring video of each channel. Note that the number of displayed window may

vary model to model.

To enter the live view screen from other interfaces, click

at the upper-right of the screen.

Figure 1-22 Live view

Live View Screen

You can view the live video from the connected cameras through each channel on the screen.
● By default, the system time, channel name and channel number are displayed on each

channel window. This setting can be configured by selecting

Main Menu

>

CAMERA

>

Overlay

>

Overlay

.

● The figure at the lower-right corner represents channel number. If the channel position is

changed or the channel name is modified, you can recognize the channel number by this

figure and then perform the operations such as record query and playback.

For the icons displayed on each channel, see Table 1-7.

Table 1-7 Icon description

Icon

Description

Video is being recorded.

Motion detection occurs in the scene.

Video loss is detected.

Channel monitoring is locked.

«
...
25
26
27
28
29
...
»

Summary of Contents for DHI-NVR608R-64-4KS2


































Reviews:

No comments