User’s Manual
6
3.3.2 Description of Primary Antenna TX Board Ports and Manual
Configuration of Hardware
TX board ports
Table 3-3
Description of TX board ports and manual configuration of hardware
Port
Function
Settings
CH1/CH2/CH3
By default,
CH1 is for connecting RX board
of primary antenna;
CH2 and CH3 is for connecting
replica antenna as needed.
Use 9 Pin cable to connect, remember that
cold plug, electrical hot plug will cause
damage to the TX board.
Power Port
1 power input port.
Use the 5 Pin power cord to connect,
remember that cold plug, electrical hot
plug will cause damage to the TX board.
USB Port
1 USB port for software
configuration.
Use the dedicated blue configuration
cable to connect.
CCTV Port
1 Port per antenna.
Optional, not required.
J201/J301/J401
Corresponding to the channel
signals of CH1, CH2, and CH3,
which is for strengthening the
function of noise reduction.
It is recommended to be used under the
guidance of technicians.
Summary of Contents for DHI-ISC-EAA6000-P
Page 28: ......
