Dahua DHI-ASA2212A User Manual Download Page 43

Page: 43 / 48

4 Daily Operation

1. How to set unlock by device?

A: Pass admin verification, select SysConfig>Relay>Unlock set unlock time, click

Note:

The device only can set unlick time, no door sensor or alarm setup.

2. How to let device support external bell?

A: External bell is for purpose of scheduled warning.

Step 1. Pass admin verification, select SysConfig>Relay>Bell, click

Step 2. Select Features>Bell setup, add or edit bell. Max 8 bells.

3. How to set attendance time and shift?

For example to set department 1 work from 8:30 to 17:30 Monday to Friday, and off

work on Saturday and Sunday.

Step 1. Select Shift>Shift setup>Shift, select attendance type and select fixed

attendance.

a) Set period to 8:30-17:30.

b) Set cycle type. Either week or month.

c) Set department shift as department bound shift.

Step 2. Select User>Department Shift, enter shift no. you set in step 1.

Note:



Device support both fixed and flexible attendance.



Shift refer to Ch 3.4.1 and 3.4.2.

4. How to verify by password?

A: In standby interface, enter work ID, and click direction key to select, enter password.

Click

to complete attendance. See Ch 3.1.

5. How to view personal attendance record (general user only)?

A: After pass attendance, click

to show personal attendance record.

6. How to enter menu?



First time of operation, click

to enter menu.



If admin user is added, you shall pass system verification before enter main menu.

Admin user can enter by swiping card, fingerprint or entering password, see Ch

3.1.

Summary of Contents for DHI-ASA2212A

















































Search results

Summary of Contents for DHI-ASA2212A

Reviews:

Related manuals for DHI-ASA2212A

Brands by name

Popular brands

Dahua DHI-ASA2212A, User Manual

Search results

Summary of Contents for DHI-ASA2212A

Reviews:

Related manuals for DHI-ASA2212A

Brands by name

Popular brands