Chart 3-6
Step 3. Click
to save.
In standby interface, it shows corresponding time status.
3.6.3 Bell
Bell mainly connects external bell, as a bell. When device is in relay mode, set bell and
you can set bell ring time, when this time is reached, external bell will ring. See Ch 3.7.4.
3.6.3.1 New Bell
The system supports up to 8 bells.
Step 1. Select Features>Bell setup>New Bell, click
Figure 3-38
Step 2. Click
or
to select parameter, click
.
Parameter
Note
Bell ID
System auto generated ID.
Bell Name
Customize bell name, max 32 characters.
Start Time
Start time of bell.
Duration
Duration of bell.
Chart 3-7
Step 3. Click
to save, click
to confirm.
