User’s Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard protection,
and protection of property damage. Read carefully before using the device, and comply with
the guidelines when using it.
Operation Requirements
●
Make sure that the power supply of the device works properly before use.
●
Do not pull out the power cable of the device while it is powered on.
●
Only use the device within the rated power range.
●
Transport, use and store the device under allowed humidity and temperature conditions.
●
Prevent liquids from splashing or dripping on the device. Make sure that there are no
objects filled with liquid on top of the device to avoid liquids flowing into it.
●
Do not disassemble the device.
Installation Requirements
●
Connect the device to the adapter before power on.
●
Strictly abide by local electrical safety standards, and make sure that the voltage in the area
is steady and conforms to the power requirements of the device.
●
Do not connect the device to more than one power supply. Otherwise, the device might
become damaged.
●
Observe all safety procedures and wear required protective equipment provided for your
use while working at heights.
●
Do not expose the device to direct sunlight or heat sources.
●
Do not install the device in humid, dusty or smoky places.
●
Install the device in a well-ventilated place, and do not block the ventilator of the device.
●
Use the power adapter or case power supply provided by the device manufacturer.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and
be no higher than PS2. Note that the power supply requirements are subject to the device
label.
●
Connect class I electrical appliances to a power socket with protective earthing.
