5
Dig four installation hole sites according to the installation holes of the bracket, please be aware
that the hole size and depth need to match those of the expansion bolt, make sure there is no
deviation for the hole sites, please refer to Figure 3-1 for more details.
Figure 3-1
Step 3
Take out M8 expansion bolt from the accessories bag, knock the expansion bolt into the holes
you have dug by a hammer, make sure the expand tubes of the expansion bolts are fully inserted
into the wall and make them parallel with the installation surface.
Step 4
Insert the four installation holes on the camera bracket into the expansion bolts, cover them with
flat gaskets and spring washers in sequence, and then lock them firmly with M8 nuts, which is to
fix the device stably on the wall
Step 5
Plug the device external cable well according to the application requirements and check if the
safety hook is stably installed.
Note:
The grounding hole is recommended to be connected to ground, which is to improve the device
stability.
Step 6
Waterproof connector installation for network port; please refer to Figure 3-2.
Note:
Please implement this step if the device is equipped with network port waterproof connector and
it is used outdoors.
