9
Figure 1-15
5.
After the installation; please use the hex wrench to secure the three M6 stainless screws.
Please make sure these three M6 stainless screws are firm so that it can secure the speed dome
on the wall mount bracket. Otherwise there is falling risk of the speed dome if these three screws
are not in the proper position.
Step 6 Secure the Speed Dome
Please select the installation wall. Please make sure the wall is thick enough to install the
expansion bolt. Please refer to chapter 3 for detailed information.
Note:
The wall can at least sustain the 8x weight of the speed dome, bracket and other accessories.
Step 7 Cable Connection
Connect the reserved integration cable of the intelligent speed dome to the corresponding power
cable, video output cable, RS485 control cable, alarm input/output port(if necessary) of the
multiple-function composite cable of the quick installation speed dome. Paste the insulating tape
in the connection position to do the proper waterproof work.
Note:
The video port is covered the heat shrink tube of high shrinking ratio. After the video connection,
please heat the tube to make sure the video port is damp proof and water proof.
Step 8 The installation of speed dome is completed, see Figure 1-16 for more details.
Summary of Contents for DH-SD6323E-H
Page 1: ...Intelligent Speed Dome Installation Manual Version 3 1 0 ...
Page 17: ...10 Figure 1 16 ...
Page 21: ...14 Figure 3 3 ...
Page 23: ...16 Figure 4 3 ...
