Dahua DH-SD6323E-H, Installation Manual

Page: 14 / 28

7
1. Please note you need to check the steel wire of the bracket is firmly secure or not.
2.
Please line up the captive screws to the quadrate groove of the bracket and then push the
bracket into the internal enclosure. Fix these two captive screws. See Figure 1-11.
Figure 1-11
Step 5 Wall Mount Bracket Installation
1. Pull the composition cable of the intelligent speed through the other end of the wall mount
bracket via the end of column of the wall mount bracket. See Figure 1-12.
2. Line up the straight line marginal of the wall mount bracket to the straight line marginal of the
internal enclosure of the intelligent speed dome. Push the intelligent speed dome to the wall
mount bracket along the straight line marginal. See Figure 1-12.
Figure 1-12
3. Use the hex wrench to turn the M6*16 inner hex stainless screw of the wall mount bracket to
the
Ф6.5 round hole bottom of straight line marginal of speed dome internal enclosure. Please
note, the step here is very important. Please make sure the screw is completely turned into the
bottom of the
Ф6.5 round hole. Otherwise there is falling risk of intelligent speed. See Figure 13
and 14 for more details.