- 11 -
3.4 Device Management
You can implement looped network config, serial port config, 802.1Q VLAN config and PORT VLAN
config via device management.
3.4.1
Ring Config
RSTP
Step 1
Connect cable according to the ring network mode shown in Figure 3-9.
Step 2
Log in WEB interface, select “System Settings > Device Management > Ring Config > RSTP”, click
“Enable”.
Step 3
Click “Save”.
Figure 3-12
Loop Protection
Redundancy ring function can be realized via ring network config. Please be noted that the function has
to be applied with convergence switch DH-PFS5424-24T or DH-PFS5924-24X. The fastest convergence
time is 5s.
Step 1
Connect cable according to the ring network mode which is shown in Figure 3-9.
Step 2
Log in WEB interface, select “System settings > Device Management > Ring Config >Loop Protection”,
click
“Enable”.
Step 3
Click “Save”.
