9
4.4 Connecting Ethernet Port
The Ethernet port is a standard RJ-45 port. With its self-adaptation function, it can be automatically
configured to full duplex/half-duplex operation mode. It supports MDI/MDI-X self-recognition of the
cable, allowing you to use a cross-over cable or straight-through cable to connect the terminal
device to the network device.
Figure 4-4 Ethernet port pin number
Figure 4-5 Pin description
The cable connection of RJ-45 connector conforms to the 568B standard (1-orange white, 2-orange,
3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).
4.5 Connecting PoE Port
You can directly connect the Switch PoE Ethernet port to the device PoE Ethernet port through
network cable to achieve synchronized network connection and power supply. With
Extend Mode
disabled, the maximum distance between the switch and the device is about 100 m.
When connecting to a non-PoE device, the device needs to be used with an isolated power supply.
