Figure 5-58
2. Set area name, it is to set valid area of motion detection according to the actual situation, and it can
set the value of sensitivity and threshold respectively.
The bigger the sensitivity is, the easier it is to generate motion detection, the smaller the threshold is,
the easier it is to generate motion detection; the entire video image is the valid area of motion
detection by default.
Note
Different colors represent different areas; each area can set different detection area.
The red line in the Oscillogram means triggering motion detection; green line means not triggering
motion detection.
3. Click
“Save” to complete area setting.
Step 5
It is to set the parameters of motion detection, please refer to Table 5-24 for more details.
