Parameter
Function
Snapshot
Select check box and set the channel number of snapshot. The
corresponding channel will take snapshot automatically when alarm occurs.
Note
Please refer to "5.1.2.5 Set path" for snapshot storage path query and
setting.
It needs to enable motion snapshot before enabling the function, please
refer to "4.5.1.2 Snapshot Schedule" for more details.
Table 5-24
Step 6
Click "Save" to complete setting.
5.4.2.2
Set Video Tamper
The system will generate alarm and activate the actions which have been set when the detection video
image is tampered.
Step 1
Select "Setup > Event > Video Detection > Video Tamper" and the system will display the interface of
"Video Tamper", which is shown in Figure 5-59.
Figure 5-59
