DH Network Camera
Product Construction Instruction Manual (Passenger Flow Solution)
20
Parameters
Description
Sensitivity
Set up the sensitivity of triggered alarm. The higher the sensitivity, the
easier the alarm is triggered.
Maximum
detection
height
Set up the maximum detection height that triggers alarm when an
object or person stands up.
Minimum
detection
height
Set up the minimum detection height that triggers alarm when an
object or person stands up.
OSD
Select
OSD
to display the internal people count in the surveillance
image.
Inside Number Select Inside number and this data is counted and displayed.
Arming
and
disarming
period
Set the alarm time period to enable the alarm event in the time range
set.
Record
Select
Record
and when an alarm occurs, the system will
automatically record the alarm.
Record Delay
When the alarm is over, the alarm recording will stop for an extended
period of time.
Alarm Output
Select
Relay-out
to start the alarm linkage output port. In case of an
alarm, the system links the corresponding relay-out device.
Alarm Delay
After an alarm finishes, the alarm is extended for a period of time and
stops.
Send Email
Select
Send Email
and the system emails you when an alarm is
triggered.
Snapshot
Select
Snapshot
and the system auto takes snapshot when an alarm
is triggered.
Step 6 Click
Save
to complete the configurations.
People Counting
