3
3
Device Installation
Fisheye camera mainly adopts ceiling mount installation, the installation location includes
ceiling and wall.
Attention
Please install the device in time after it is opened, which is to avoid the camera module
exposing in the damp environment for a long time.
Before the installation, please make sure the installation surface is thick enough to sustain
at least 3X weight of the camera.
For side cable outlet, please make sure the direction of side cable outlet is in accordance
with that of the installation position map when pasting installation position map, and pull
the cable through the cable slot of the pedestal and then lock the screws firmly.
Before you complete the installation and debugging, do not remove the electrostatic
attraction film on the transparent enclosure. Otherwise it may result in injury. After
removing the
electrostatic attraction film, don’t touch dome enclosure in case it may leave
stain.
The installation figures below are for reference only, please refer to the actual device for
more details.
Please refer to Figure 3-1 for installation position map.
Figure 3-1
Please refer to Figure 3-2 for ceiling mount installation.
Figure 3-2
Please refer to Figure 3-3 for wall mount installation
