41
Login
Open IE web browser, enter the IP address of the access controller in the address bar, and
press Enter.
IE 8 and later are supported. Otherwise you might not log in to the web.
Make sure that the computer used to log in to the web is in the same LAN with the device.
7-inch model B access controllers of have dual NICs. The default management address
for ETH1 is 192.168.1.108, and for ETH2 is 192.168.2.108.
Log in
Enter the user name and password.
The default administrator name is admin, and the password is the login password after
initializing the access controller. Modify the administrator regularly and keep it properly
for the sake of security.
If you forget the administrator login password, you can click
Forgot password?
to reset
it. See "4.3 Resetting the Password."
Click
Login
.
Resetting the Password
When resetting the password of the admin account, your email address will be needed.
On the login interface, click
Forgot password?
.
