Dahua ARD1611-W, Manual

Page: 9 / 12

5
6.
Device Installation
Warning:

Installation and debugging must be executed by professional staff. If you encounter
device failure, please do not open and repair the device, you shall contact its
after-sales department.

Avoid installation in environment under direct sunlight.

Avoid installation in environment with fast wind speed change.

Avoid installation in environment of high temperature.

Avoid installation in environment where there is anything that could be a shield in the
area.

Avoid installation in places with a large amount of metal objects.
Steps to intall:
Step 1. Take down bracket which is installed at bottom case of the detector. See Figure
6- 1.
Figure 6- 1
Step 2. Dig through the hole on bracket for installation.
Step 3. During installation, make the bottom of bracket parallel to the wall, fix screw on
wall thourhg hole on bracket, and then hang detector on installation bracket by
placing the holes on detecor onto the hook of bracket. See Figure 6- 2.
Installation hole
Поставщик систем безопасности TELECAMERA.RU