15
4 Arm/Disarm
4.1 Arm/Disarm
4.1.1 Before Arming
1. Check wiring at each part and external devices connected.
2. Confirm whether wireless device has been successfully coded wirelessly to controller.
3. Confirm whether zone parameter is set correctly.
4. Arm all once, check whether zone is abnormal. If there is abnormal, you will see prompt as
in
Figure 4- 1
.
Figure 4- 1
Now you can manually check sensor, and solve abnormality, or force it to arm without
solving abnormality.
4.1.2 WEB Disarm
4.1.2.1
Arm
You can arm zone of alarm controller.
Step 1. Select SETUP>Zone Management>Arm/Disarm Zone. See
Figure 4- 2
.
Figure 4- 2
