24
4
Web Operation
The standalone can be configured and operated on the web. Through the web you can set
network parameters, video parameters, and standalone parameters; and you can also maintain
and update the system.
Initialization
4.1
You need to set a password and an email address before logging in to the web for the first time.
Open IE web browser, enter the IP address (the default address is 192.168.1.108) of
Step 1
the standalone in the address bar, and then press Enter key.
The
Initialization
interface is displayed.
Use browser newer than IE 8, otherwise you might not log in to the web.
Initialization
Figure 4-1
Enter the new password, confirm password, enter an email address, and then tap
Next
.
Step 2
For security, keep the password properly after initialization and change the
password regularly.
The password should consist of 8 to 32 non-blank characters and contain at least
two types of characters among upper case, lower case, number, and special
character (excluding ' " ; : &). Set a password of high security level according to
the password strength prompt.
When you need to reset the administrator password by scanning the QR code,
you need an email address to receive the security code.
Summary of Contents for Access Standalone
