Installation 8
Connect the camera to power source and HCVR, and aim the lens to the ideal angle,
Step 5
see Figure 3-5. Put the Dome
⑥
back on and fasten the locking screws
⑤
.
Adjusting Model C
Figure 3-5
3.4
Installing Model D (1)
For the installation diagram and item list of model D (1), see Figure 3-6 and Table 3-4.
Model D (1) installation diagram
Figure 3-6
Table 3-4 Model D (1) installation item list
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Clamp
③
Device
Pull the cable through mounting surface
①
and attach the device
③
to the mounting
Step 1
surface
①
with the clamp
②
.
Reinforce the device
③
to the mounting surface
①
by putting more sealant to the joint.
Step 2
3.5
Installing Model D (2) and Model D (3)
For the installation diagram and item list of Model D (2) and Model D (3), see Figure 3-7 and
Model D (2) and Model D (3) installation diagram
Figure 3-7
