Installation 6
3.2
Installing Model B
For the installation diagram and item list of model B, see Figure 3-2 and Table 3-2.
Model B installation diagram
Figure 3-2
Table 3-2 Model B installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Self-tapping screw
⑤
Device
⑥
Enclosure
⑦
/
⑧
Locking screw
—
—
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
Step 1
surface) on the mounting surface
①
as indicated on the positioning map, then insert
expansion bolts
②
in the screw holes.
Loosen the locking screws
⑦
/
⑧
and take the pedestal
③
off.
Step 2
Adjust the location of the pedestal
③
according to cable outlet requirement (top out or
Step 3
side out), then pull the cable out through the mounting surface
①
or the side cable tray.
Align the screw holes on the pedestal
③
to those on the mounting surface, then put in
and fasten the self-tapping screws
④
to attach the device
⑤
to the mounting surface.
Put the enclosure
⑥
back on and adjust the locking screws
⑦
/
⑧
to hold it. Connect the
Step 4
device
⑤
to power source and HCVR, aim the lens to the ideal angle (see Figure 3-3)
and fasten the locking screws
⑦
/
⑧
.
Adjusting Model B
Figure 3-3
