Installation 7
3.3
Installing Model C
Screw cover is available on select models.
For the installation diagram and item list of model C, see Figure 3-4 and Table 3-3.
Model C installation diagram
Figure 3-4
Table 3-3 Model C installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Self-tapping screw
⑤
Locking screw
⑥
Dome
⑦
Wrench
⑧
Screw Cover
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
Step 1
surface) on the mounting surface
①
as indicated on the positioning map, then insert
expansion bolts
②
in the screw holes.
Loosen the locking screws
⑤
on the dome
⑥
with the supplied wrench
⑦
and take the
Step 2
dome
⑥
off.
Adjust the location of the pedestal
③
according to cable outlet requirement (top out or
Step 3
side out), then pull the cable out through mounting surface or the side cable tray. Align
the screw holes on the pedestal
③
to those on the mounting surface.
Put the screw covers
⑧
in the screw holes on the pedestal
③
, then put the supplied
Step 4
self-tapping screws
④
through the screw covers
⑧
and fasten them to attach the
device to the mounting surface.
