Installation 5
3
Installation
Make sure the mounting surface is strong enough to hold at least three times of the
camera weight.
Keep the protection film on the dome before installation and adjustment finished to avoid
possible scratch.
Properly handle the device after unpacking. Do not expose the device in humid
environment.
The following figure is for reference only, and the actual product shall prevail.
3.1
Installing Model A Series
For the installation diagram and item list of model A (1) and model A (2), see Figure 3-1 and
Model A series installation diagram
Figure 3-1
Table 3-1 Model A series installation item list
No.
Item
No.
Item
No.
Item
①
Device
②
Self-tapping screw
③
Bracket
④
Cable
⑤
Expansion bolt
⑥
Mounting surface
Unscrew the locking screws on the bracket
③
to detach it.
Step 1
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
Step 2
surface) on the mounting surface
⑥
, then insert expansion bolts
⑤
in the screw holes.
Align the screw holes on the bracket
③
to those on the mounting surface
⑥
, then put in
Step 3
and fasten the supplied self-tapping screws
②
to attach the bracket
③
to the mounting
surface.
Adjust the location of the device
①
on the bracket
③
and fasten the locking screws to
Step 4
attach the device
①
on the bracket
③
.
