11
4.1 Preparing the Camera
The Network PTZ camera comes with the PFB303W Wall Mount and the PFA111 Mount Adapter, the
installer must supply the following hardware:
•
Four (4) bolts, washers or other fastening hardware to secure the wall mount to the installation
medium. The hardware must be capable of supporting eight (8) times the weight of the camera
and mount.
•
Appropriate tools to mount the camera to the wall.
Unpacking the Camera
1. Remove the camera, the mount accessories and any hardware packages from the boxes.
2. Remove the camera from the plastic wrapping and place the camera dome-end up in the foam
packaging.
4.2 Insert a Micro SD Card
The Micro SD card slot is located on the actual camera module.
Figure 4-2
1. Loosen the two (2) screws from the rear panel on the back of the dome. Remove the panel.
2. Insert the Micro SD card into the appropriate slot on the camera module.
3. Replace the rear panel.
