Dahua 3100 series, User Manual

Page: 29 / 137

29
Move your mouse to the left top corner of the preview interface; you can see the preview
zoom button. See Figure 4-4. Left click the icon; you can see a hook icon. Now you have
enabled the preview zoom function. You can drag the mouse to zoom in the image.
Figure 4-4
4.2 Record
4.2.1 Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time and
channel name. If you want to change system date and time, you can refer to general settings
(Main Menu->Setting->General). If you want to modify the channel name, please refer to the
display settings (Main Menu->Setting->Display)
4.2.2 Record
Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
4.2.2.1 Record menu
There are two ways for you to go to Record menu.

Right click mouse or in the main menu, Advanced->Manual Record.

In live viewing mode, click record button in the front panel or record button in the remote
control.
Record menu is shown as in Figure 4-5.
4.2.2.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon
“○”
to select
corresponding channel.

Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.

Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>Schedule)

Stop: All channels stop recording.
1
Recording status
3
Video loss
2
Motion detection
4
Camera lock
Preview
zoom button