Installation
Installa
tion -
1
Template Sheet
2
3
4
To pass cables through the wall/ceiling, drill holes on
the wall/ceiling.
Connect the network cable, power cable respectively.
See the section ‘Installation - Cabling’ for details.
Fix the camer
a on the wall/ceiling by screw provided.
A
ft
er adju
stin
g th
e view
angle,
ti
ghten the Pan/Tilt
stoper scr
ew
.
Reset to the Factory Defaults
Press the reset bu
tton fo
r 5 seconds to return the setup
to the Factory Default.
Warning:
If you press the ‘Reset’ button, you will lose all setting
data. If needed, please, make a note for further
installation.
Before installing your camera, you have to read the following cautions.
2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
1. You have to check whether the location can bear five times of the weight of your camera.
3. When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
it may cause a breakdown or fire.
a
b
c
Put the Lan cable into (a), then (b) will be assembled to (a)
without making any space.
tightly. As a final step, (c) need to be assembled to (b)
Loosen the Pan/Tilt stoper screw a little before fixing the camera.
Reset Button